Flow 200
EN 13813 CT C5 F2 en

FLOW 200

LEVELLING FLOOR SCREED 1 - 3 cm

Ready mortar based on grey Portland cement, white marble graded aggregates and special additives to improve adhesion to difficult surfaces and improve its flow properties. It does not contain lime. It minimizes material preparation time and increases the speed of application.

PACKAGING:

Bags of 40 kg

In bulk in a silo with a capacity of 12 – 18 – 22 m³

COLOR:

Grey

CHARACTERISTICS:

Application Temperature

+5°C to +35°C

Consumption

16 – 18 kg of dry mortar per m², for 1 cm of thickness

ΠΡΟΣΘΗΚΗΝΕΡΟΥ

Dilution

5 – 5,5 kg / bag

Specific Weight of Fresh Mortar

1950 kg/m³

Download the relevant technical files:

Uses

Use FLOW 200 to fill and level floors, to create a final surface for fixing ceramic tiles, marbles or granites. Suitable for indoors or outdoors use (balconies, roofs, flat-roofs, etc.). It does not crack. It produces a perfect and particularly hard final surface. Recommended for thickness 1 to 3 cm.

Advantages

  • Very high strength
  • Excellent adhesion
  • Moisture- and frost-proof
  • Prevents cracking
  • Excellent final surface
  • Indoors and outdoors use
  • Easy to apply
  • Excellent workability
  • Fast to prepare – simply add water
  • Make sure that the surface is clean, structurally adequate, free of dust, grease etc.
  • In a clean container, put the necessary quantity of clean water and pour the content of the bag gradually, while stirring continuously, preferably with an electric mixer at slow speed (500 rev / min), until you get a homogeneous thin mortar mixture.
  • Sprinkle the application surfaces with water, before and after applying the mortar, especially in summer period.
  • Spread and lay the fresh mortar in one layer, 1 to 3 cm thick.
  • Step on the floor at least 12 hours later and fix tiles or marbles at least 48 hours later, depending on the weather conditions.
  • Application temperature +5°C to +35°C.
  • Mixing water: 5.0 – 5.5 lt of water for a 40 kg bag.