Universal White
C1T 2



White tile adhesive based on high-strength Portland white cement (I-52.5), white marble aggregates and special additives to improve adhesion, with improved anti – slip properties.


  • Bags of 25 kg
  • Plastic bags of 5 kg




Application Temperature

+5°C to +35°C

Application Tools

Notched trowel (size according to the type of tile and the substrate)


Approx. 2.5 – 4.0 kg/m², depending on the size and type of tile

Open Application Time

20-25 min

Download the relevant technical files:


A reliable solution for professionals. For strong adhesions of ceramic and monocottura tiles, and decorative bricks on common cementitious-based substrates of floor or wall, indoors or outdoors. When applied to tiles with reduced-absorbency, it is recommended to mix it with the MARMOLINE MP 20 acrylic dispersion.


  • High strength
  • Excellent adhesion
  • Moisture and frost-proof
  • Incomparable quality of raw materials
  • Easy to apply – excellent workability
  • Indoor and outdoor use
  • Check that the substrate is clean, dry and free from dust, greasy and loose particles.
  • If the substrate is unstable or crumbles, it is recommended to prime the surface with MARMOLINE MST 11 acrylic water based primer.
  • Mix with the necessary quantity of water, using an electric mixer at low speed, until a homogeneous, lump-free mixture is obtained.
  • Leave the mixture to set for five to ten minutes and stir again.
  • Spread with a notched trowel; choose the size according to the type of tile and the substrate.
  • Tiles must be fixed within 20 minutes of applying the adhesive and definitely before it skins-over.
  • The adhesive remains workable in the pot for 3 to 4 hours, depending on the season and environmental temperature and humidity.
  • When the adhesive begins to set, stir again without adding water.
  • Proceed to joint-filling after 24 hours (floors) or 12 hours (walls).
  • For difficult applications it is recommended to add 1-3 kg of acrylic dispersion MARMOLINE MP20, to 25 kg of UNIVERSAL WHITE, to reinforce the mixture.
  • Mixing ratio: 6.5 – 7 lt of water /bag of 25 kg.
  • Application temperature +5°C to +35°C.