decor sv 010
GP/CSIII/Wc2 2

DECOR SV 010

WHITE WATER-REPELLENT RENDER FOR EXTERIOR USE

Ready mortar based on high-strength Portland white cement (Ι – Water repellent, cement based finish coat render. Applied as a final coating, ready for scrubbing and painting. It is particularly resistant to moisture, snow and frost. Used as a finish coat on the external wall insulation systems in combination with the fibre reinforced adhesive FK 202.

PACKAGING:

  • Bags of 25 kg
  • Big-bags of 1000 kg
  • In bulk in a silo with a capacity of 12 – 18 – 22 m³

COLOR:

White

CHARACTERISTICS:

Application Temperature

+5°C to +35°C

Application Tools

Trowel, special mixer machine M-TEC

Consumption

Approx. 6 – 7 kg of mortar per m² of 0.5 cm thick plaster

Specific Weight of Fresh Mortar

1700 kg/m³

Water Demand

5 – 6 lt/bag

Download the relevant technical files:

Uses

Use it when applying the three-coat technique, as finish-coat plaster (marble based) on exterior surfaces previously roughcasted with SV2 base-coat plaster. Ideal in case where additional protection from humidity is needed (seafront houses, islands, mountainous areas, etc.). Also used as a finish coat on the external wall insulation systems in combination with the fibre reinforced adhesive FK 202. Due to its fine granulometry (<1.2 mm) and to the physical characteristics of marble powder, it gives a white and smooth final surface ready for scrubbing and painting. In special cases, the product can be reinforced with MARMOLINE MP 20 acrylic dispersion.

Advantages

  • High strength
  • Excellent adhesion
  • Moisture- and frost-proof
  • Interior and exterior use
  • Easy to apply
  • Excellent workability
  • Water repellent
  • Smooth – White surface
  • Prevents cracking
  • Fast to prepare
  • Apply it after the SV2 (or TL2) base-coat plaster, once this is completely dry (15 – 20 days in summer, more than 1 month in winter).
  • Check and prepare the application surface. Make sure that the surface is clean and saturate it with water.
  • Mix by hand or using special machines (mixers – pumps), supplied by MARMOLINE, which make work simpler and faster.
  • If you want to give colour to the product, use the natural pigments MARMOLINE POWDER COLOUR, following their instructions.
  • Apply in one coat, approximately 0.5 cm thick. Distribute the wet mortar uniformly on the wall using a lath.
  • Leave the wet mortar to set and then, for the finishing touch, float the surface with a large hard sponge or with a piece of EPS
  • In the next 2 – 3 days, especially in summer period, it is recommended to saturate the surface regularly, in order to avoid possible cracks.
  • On uniform surfaces the work should not be interrupted, in order to avoid colour shadows.