Fp 140
998 1 gp cs ii w1 2

FP 140

WATERPROOF FINISH-COAT PLASTER

Ready mortar based on high-strength Portland white cement (Ι – 52.5), fine-grained aggregates from the famous Greek Dionyssos white marble, calcium hydroxide and special additives to improve adhesion and achieve waterproofing. Mix only with water. It minimizes material preparation time and increases the speed of application. Used as a finish coat on the external wall insulation systems in combination with the fibre reinforced adhesive FK 202.

PACKAGING:

  • Bags of 25 kg
  • Big bags of 1000 kg
  • In bulk in a silo with  capacity 12 – 18 – 22 m³

COLOR:

White

CHARACTERISTICS:

Application Temperature

+5°C to +35°C

Application Tools

Trowel, special mixer machine M-TEC

Consumption

Approx. 7 – 7.5 kg of mortar, per m² of 0.5 cm thick plaster

Water Demand

5 – 6 lt of water /bag of 25 kg

Download the relevant technical files:

Uses

Use when applying the three-coat technique, as finish-coat plaster (marble) on exterior surfaces previously roughcasted with SV 2 base-coat plaster. Ideal for protection from humidity (seafront houses, islands, mountainous – partly mountainous areas, etc.). Also used as a finish coat on the external wall insulation systems in combination with the fibre reinforced adhesive FK 202. It gives a white and smooth final surface ready for scrubbing and painting, due to the nature and fine granulometry of Dionyssos marble content (< 1,2 mm). In special cases, the product can be further reinforced by adding MARMOLINE MP 20 acrylic dispersion.

Advantages

  • High strength
  • Excellent adhesion
  • Moisture- and frost-proof
  • Indoor and outdoor use
  • Easy to apply
  • Excellent workability
  • Water repellent
  • Low permeability
  • Smooth – White surface
  • Prevents cracking
  • Fast to prepare
  • Stable quality
  • Apply after the SV 2 (or TL 2) base-coat plaster, once completely dry (15 – 20 days in summer, more than 1 month in winter).
  • Check and prepare the application surface. Make sure that the surface is clean and sprinkle with water.
  • Mix by hand or using special machines (mixers – pumps), supplied by MARMOLINE, which make work simpler and faster.
  • Apply on the wall, using either a trowel or the machine.
  • Apply in one coat, approximately 0.5 cm thick. Distribute the wet mortar uniformly on the wall using a lath.
  • Leave the wet mortar to set.
  • For the finishing touch, float the surface, in the traditional way.
  • In the next 2 – 3 days, especially in summer period, it is recommended to saturate the surface regularly, in order to avoid any cracks.
  • Application temperature +5°C to +35°C.
  • Mixing ratio: 5 – 6 lt of water /bag of 25 kg.