SEALING TAPE
Joint sealing tape for use under tiles or natural stones, designed for the flexible sealing of expansion joints.
PACKAGING:
50m / roll
COLOR:
CHARACTERISTICS:
Consumption
1.05 m/m
Uses
Joint sealing tape for use under tiles or natural stones, designed for the flexible sealing of expansion joints. The substrate consists of a knitted base of modified polyester with a permanent finish, while the coating is a thermoplastic elastomer, highly resistant to aging. SR TAPE sealing tape has been categorized according to EMICODE EC 1 PLUS, VOCregulation A +, while offering very good behavior against chemicals.The tape is used for waterproofing /sealing of joints in wet areas (bathrooms, kitchens, etc.). Suitable for use indoors on various substrates such as concrete, cement mortar, plasterboard, old layers of tiles, mosaic, masonry, etc. It is suitable for moderate to high moisture loads without pressure, in indoor areas such as domestic bathrooms and showers, for public or private use. After the waterproofing has cured, you can proceed to the next step (e.g. applying a waterproofing mortar).
Advantages
• Excellent workability – highly flexible
• Ideal for waterproofing wet areas with the MARMOLINE AQUATA ELASTIC or AQUATA FL systems
• Increases the strength of the waterproofing system
• Increases the flexibility of the waterproofing system
• Resistant to alkalis
• Durable
SUBSTRATE PREPARATION
The substrate must be stable, solid, dry and free of dust, loosely adhering particles and all kinds of contaminants. Prepare the waterproofing mortar (MARMOLINE AQUATA ELASTIC or AQUATA FL) and apply it evenly to the corner area. Form and correctly position a suitable piece of sealing tape in each corner. Using a trowel, press the excess waterproofing mortar outwards and smooth it evenly. Before application to the joints, cut the sealing tape to the required length of the wall joint. A minimum overlap of 50 mm must be provided at the sealing corner. Apply the waterproofing mortar evenly along the wall/floor junction. Position the sealing tape and press it firmly into place using a trowel. Press the excess mortar out to the sides and smooth it evenly. To ensure secure overlapping of the tape at corners and joints, apply a second coat of waterproofing mortar.
TOOLS CLEANING
With plenty of water immediately after use. Hardened and/or cured material can only be removed by mechanically means.
LEGAL NOTES
The technical characteristics referred to in this data sheet are provided exclusively on the basis of information and declarations supplied by the product manufacturer. The information provided does not constitute any warranty, either express or implied, nor does it represent a binding technical specification, and is supplied for informational purposes only. Our company, acting as a commercial distributor, shall bear no responsibility or liability for any deviations, variations or modifications of the product’s technical characteristics in relation to those stated herein. Our company reserves the right to amend or modify the contents of this leaflet without prior notice.
It is recommended to store in a clean, dry place, at temperatures between -5°C and 30°C, protected from frost, direct radiation from any heat source or from the direct action of the sun’s rays. The film can be used for up to 24 months from its production date.
Previous product
Next product