AD PRO 30
White cement-based tile adhesive. Provides high initial and final adhesion strength and moisture resistance. It is classified as a type C1 adhesive according to the EN 12004 standard. Suitable for fixing ceramic tiles, on wall or floor, on surfaces made of concrete, render etc.
PACKAGING:
20 kg paper bag – 960 kg pallet (48 paper bags)
COLOR:
CHARACTERISTICS:
Application Temperature
+5°C to +35°C
Application Tools
2.5 – 4.0 kg/m2, depending on the levelling of the surface, the size and the type of tile
Consumption
2.5 – 4.0 kg/m2, depending on the levelling of the surface, the size and the type of tile
Open Application Time
approx. 20 minutes
Specific Weight of Fresh Mortar
~ 1.60 kg/lt (+20°C)
Water Demand
For a 20 kg bag, add approximately 5.5 litters of clean water
Uses
AD PRO 30 is suitable for fixing the following types of tiles:
- Tiles of any type
- Low absorbency tiles
- Artificial and natural granite tiles
- Glass tiles
- Gres porcelain type tiles
- Decorative stones, natural or artificial
AD PRO 30 is suitable for application on the following types of substrates:
- Concrete and cement mortars
- Coatings & mortars
- Cement boards, plasterboards (using a suitable primer)
- Brick masonry
Advantages
- Extended open time
- High strength
- Excellent adhesion
- Moisture and frost-proof
- Incomparable quality of raw materials
- Easy to apply – excellent workability
- Indoor and outdoor use
- Check that the substrate is clean, dry and free from loose particles and other materials. If the substrate is unstable or crumbles, then it is recommended to prime the surface with MARMOLINE MST 11 acrylic water based primer.
- Mix well, with a low-speed electric stirrer, one bag 20 kg of AD PRO 30 with around 5.5 liters of clean water until a homogeneous, lump-free mixture is obtained. Leave the mixture to set for 10 minutes and stir again for 1-2 minutes.
- Spread with a notched trowel; choose the size according to the type of tile and the substrate. Tiles must be fixed within 15 – 20 minutes after applying the adhesive and definitely before it skins-over.
- Fix the tiles by applying pressure to them. The adhesive remains workable in the pot for 3 to 4 hours, depending on the season, temperature and humidity of the environment.
- When the adhesive begins to set, stir again without adding water. Proceed to grouting after 24 hours for floors and 12 hours for walls.
In the original, closed, sealed and indestructible packaging, protected from direct sunlight and frost and at temperatures from +5°C to +35°C
Previous product
Next product
