EASY GEL 90
High quality, polymer-modified, cement-based, white tile adhesive, with gel technology, modified with aggregates and special additives for zero vertical slip and extended open application time. Suitable for substrates requiring high adhesion of absorbent and nonabsorbent tiles, on horizontal or vertical surfaces.
PACKAGING:
25 kg paper bag – 1500 kg pallet (60 paper bags)
COLOR:
CHARACTERISTICS:
Application Tools
Notched trowel
Consumption
2.5 – 4.0 kg/m², depending on the levelling of the surface, the size and the type of tile
Mixing
7.0 lt water/bag 25 kg
Open Application Time
30 minutes
Specific Weight of Fresh Mortar
1.56 kg/lt (+20°C)
Water Demand
7.0 lt water/bag 25 kg
Uses
High quality, polymer-modified, cement-based, white tile adhesive, with gel technology, modified with aggregates and special additives for zero vertical slip and extended open application time. Suitable for substrates requiring high adhesion of absorbent and nonabsorbent tiles, on horizontal or vertical surfaces. Classified as C2TE according to ΕΝ 12004 with CE marking. With EUROFINS – Indoor Air Comfort Gold certification which ensures that EASY GEL 90 meets the strictest European regulations regarding VOC emissions
Advantages
- Excellent adhesion even on demanding substrates
- Zero vertical slip of the tiles during their installation
- Extended open time
- High resistance to temperature fluctuations (heat-cold) and humidity
- Easily application
- Excellent workability
It is also suitable for fixing the following types of tiles:
- Absorbent and non-absorbent tiles, small tomedium dimensions
- Marble and mosaics
- Artificial and natural decorative stones
- Artificial and natural granite tiles
- Cotto tiles, klinker tiles
- Gres porcelanato tiles
- Glass tiles
SUBSTRATE PREPARATION
Check that the substrate is clean, dry and free from loose particles and other materials. If the substrate is unstable or crumbles, then it is recommended to prime the surface with MARMOLINE MST 11 acrylic water based primer.
MIXING
Mix well, with a low-speed electric stirrer, one bag 25 kg of EASY GEL 90 with around 7 Liters of clean water until a homogeneous, lump-free mixture is obtained. Leave the mixture to set for 5-10 minutes and stir again for 1-2 minutes. Spread with a notched trowel; choose the size according to the type of tile and the substrate. Tiles must be fixed within 30 minutes after applying the adhesive and before it skins-over.
APPLICATION
Fix the tiles by applying pressure to them. The adhesive remains workable in the pot for approximately 4 hours, depending on the season, temperature and humidity of the environment. When the adhesive begins to set, stir again without adding water. Proceed to grouting after 24 hours for floors and 12 hours for walls.
TOOLS CLEANING
Raw material should be removed immediately from the application equipment with water. Hardened/mature material can only be removed mechanically.
IMPORTANT NOTES
- The application of the adhesive should be done at temperatures between +5°C and +35°C, without exposure to extreme weather conditions.
- Apply only on stable, well-prepared substrates.
- Do not exceed the recommended maximum amount of mixing water.
- Do not add extra water to adhesive that has already started to set.
- Do not exceed the maximum application thickness. Protect the application surface from frost, wind and direct sunlight for at least 24 hours after application.
COMPLIANCE WITH STANDARDS
It has CE marking and Performance Declaration as improved, normal setting cementitious tile adhesive with reduced slip and extended available time, C2TE, according to EN 12004: 2007.
In the original, closed, sealed and indestructible packaging, protected from direct sunlight and frost and at temperatures from +5°C to +35°C
Previous product
Next product
