-
![1504-5 ce eng](/_gatsby/image/c261057ff5218b0020937c32828bdf60/cb3ab1bd97c2072754b22a5d65b80cdd/1504-5-ce-eng.png?u=https%3A%2F%2Fmarmoline.s3.eu-west-1.amazonaws.com%2Fwp-content%2Fuploads%2F2022%2F01%2F1504-5-ce-eng.png&a=w%3D28%26h%3D28%26fm%3Dpng%26q%3D75&cd=11a3d0f75f8a47bdc27ecc2dd4ca53fc)
TOP COAT PRIMER
TWO COMPONENT EPOXY PRIMER WITHOUT SOLVENTS
Two component, low viscosity epoxy resin. It consists of a special thin resin and hardener. Suitable to be used as a primer before the application of TOP COAT EP
PACKAGING:
Plastic containers (components A+B) 3 kg
Component Α (resin )=2.25kg
Component Β( hardener) = 0.75kg
COLOR:
Transparent
CHARACTERISTICS:
Drying
4 -8 hours
-
Uses
It can be used as a primer before applying the epoxy floor protection system TOP COAT EP, as well as for the adhesion between newly laid and old concrete.
-
-
Advantages
- Low Viscosity
- High mechanical strength
- High adhesion in concrete, rock, metal
- It does not shrink
- Impermeable after its polymerization
-
- The surface to apply TOP COAT PRIMER should be structurally sound, relatively smooth, dry (substrate humidity<4%), clean and free from any foreign particles.
- The temperature of the substrate should be between 8º – 30º C. Use the appropriate winter (W) or summer (S) version of TOP COAT PRIMER depending on the conditions.
- Before the mixing of the two components mix each component separately and then mechanically mix component A and component B for about 2-3 minutes to achieve a homogeneous yellowish color mixture.
- TOP COAT PRIMER is applied with a short-haired roller or with a rubber squeegee.
Maximum storage time in intact packaging, dry environment and ambient temperature between 5°C & 30°C: 24 months from the production date
Previous product
Next product